Vrste gline i ukrasavanje (Types of clay and decoration)

Fimo glina je vrsta polimerne gline koja se stvrdnjava pecenjem u rerni. Uglavnom se pece na 130 C 30 minuta ili na 100 do 120C oko 30 minuta.

Za vise nijansi boje se mogu mesati.

Posle pecenja fimo masa je otporna na vodu.

Fimo masa se najcesce koristi za izradu figurica, nakita, za ukrasavanje posuda, casa, i drugo.

Ima tri vrste fimo mase: fimo soft, fimo klasik, fimo efekt.

Fimo soft - masa koju pre upotrebe ne treba puno omeksavati pre modeliranja. Dobra je za pocernike. Fimo soft masa ima 24 nijanse.

Fimo klasik - masa je tvrdja i zato joj treba dosta vremena da omeksa. Fimo klasik ima 24 nijanse i moze se mesati sa fimo soft masom.

Fimo efekt - masa sadrzi u sebi efekte sljokica i sjaja a postoji i transparentna.

Za ukrasavanje

Ako koristite fimo lak - Ako mozete, kupite kist sa mekanom dlakom za nanosenje fimo laka. Lak se nanosi na potpuno suvu i cistu povrsinu. Nemojte nanositi lak ako je povrsina masna. Prvi sloj se susi 30 minuta. Drugi sloj 24 sata. Lak cuvajte od toplote i smrzavanja.

NIKADA ne koristite lak za nokte za lakiranje bilo koje gline.

Mozete koristiti i dekorativne flomastere.

Fimo clay is a type of polymer clay that hardens by baking in the oven. It is generally baked at 130 C for 30 minutes or at 100 to 120C for about 30 minutes.

For more shades the colors can be mixed.

After baking, the fimo mass is water resistant.

Fimo mass is most often used for making figurines, jewelry, for decorating vessels, glasses, and more.

There are three types of fimo mass: fimo soft, fimo classic, fimo effect.

Fimo soft - mass that doesn't need to be softened much before use - before modeling. It's good for beginners. Fimo soft mass has 24 shades.

Fimo classic - mass is hard, so it takes a long time to soften. The Fimo classic has 24 shades and can be mixed with fimo soft mass.

Fimo effect - the mass contains the effects of glitter and gloss and there is a transparent effect.

For decoration

If you use fimo lacquer - If you can, buy a soft coat brush to apply fimo lacquer. The varnish is applied to a completely dry and clean surface. Do not apply varnish if the surface is oily. Dry the first layer for 30 minutes. Second coat will be dry in 24 hours. Keep the varnish away from heat and freezing.

NEVER use nail polish to paint any clay.

You can use decorative felt pen.